PB Training Services Ltd are fully qualifies to carry out a number of services for you. These include:
The Lifting Operations & lifting Equipment Regulations 1998 requires that all equipment used for lifting is fit for purpose, appropriate for the task and marked with a suitable standard (BS, ISO, EN etc.) All Equipment must be maintained in a safe condition. Records must be kept of all thorough examinations and defects found must be reported to the person responsible and the relevant enforcing authority That all lifting operations involving lifting equipment must be properly planned by a competent person and appropriately. LOLER regulations apply to, mobile elevated work platforms / cherry pickers (MEWPS), goods and personnel hoists, all types of fork lift truck and block and tackle.
Safety Harness. Lanyard and Inertia Reel Inspections
BS8437:2012 demands that formal inspection procedures should be put in place by all employers to ensure that personal fall protection equipment is given a detailed inspection and examination by a competent person before first use and at intervals not exceeding 6 months. At PB Training Services we can offer these inspections and examination services either on site for a large number of items, or you can drop a smaller number into our centre in Brierley Hill
Fire Risk Assessments for Premises
From 1st October 2006 The Regulatory Reform (Fire Safety) Order 2005 requires the Responsible Person (RP) of any non domestic premises to carry out a fire risk assessment, including measures to reduce or eliminate the risk of fire, and identify persons at risk. Where there are 5 or more employees, a record must be kept of significant findings and a definition of a Responsible Person is contained in the above Order.
Face Fit Testing
Under the COSHH 2002 Regulations it is a requirement that all tight fitting face pieces should be face fit tested to ensure that the selected RPE has the potential to provide adequate protection for the individual wearers. At PB Training Services Ltd we follow the HSE282/28 'Fit testing of respiratory Protective Equipment face Pieces' guidance notes; there is detailed information about fit, testing methods, techniques and protocols, practical aspects, records and theory. By following this guidance employers will normally be seen as doing enough to comply with the law. We have a highly skilled team which will operate either on site for a large number of people, or even use our centre based in Brierley Hill.
We have fully trained staff who will come onto your premises and run your hearing testing programme for you, ensuring that you meet your obligations with respect to the HSE Noise at Work Regulations. Screening programmes also reduce the risk of costly injury claims, many of which are settled by insurance companies due to the lack of evidence of hearing care in the workplace.
3M E-A-R FIT Validation
E-A-R fit is designed to help validate hearing protection and compliance with hearing protection fit testing. It delivers an objective, quantitative measurement of each employees protection, so you can better protect your workforce whilst helping employees understand the importance of a proper fit.
down to earth and informative
Paul was very down to earth and informative on what we had to do. Wicked sense of humour and makes you feel at ease! Thanks Paul!
very friendly highly recommend
2 days basic H&S done, very friendly highly recommend team see you again in 2 years
my first choice Training provider
I have been sending delegates to PB Training for several years. They are my first choice Training provider. Excellent training, excellent advice, excellent service.
very knowledgeable Had a great time
Very much down to earth good sense of humour and very knowledgeable. Had a great time.
Brierley Hill Training Centre
Birmingham Training Centre
0121 333 5436